GIGABYTE GA-K8VM800M SATA DRIVER
Hi, I think you need to look at the motherboard again to check the model number. If I change the cables and then try again, it works. I have a spare sata hard disk. Download PCWizard, an excellent free utility, from here: Hi, the latest bios can be downloaded from here:
|Date Added:||27 July 2008|
|File Size:||18.95 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
Gigabyte GA-K8VM800M – motherboard – micro ATX – Socket 754 – K8M800
If you leave the battery out for about 15 minutes with the system unplugged from the wall, that will clear your current bios settings and may fix the problem without needing to reflash the sqta.
Download Ga-k8vm8800m, an excellent free utility, from here: HI Thanks for the reply. March 26, Gigabyte lists three models in their support: Hi, the latest bios can be downloaded from here: The BIOS document tells you how to do that.
March 29, Those boards usually have bios settings that must be set right in order to recognize SATA drives. Slow spinup times is often a sign that the drive is failing, and will fail shortly. First the IDE drive. You might try installing a fresh motherboard battery first.
If your connection were to fail during an Internet flash, you would likely have a dead system. March 31, Remember to backup your current bios image before flashing.
GA-K8VMM (rev. 2.x) | Motherboard – GIGABYTE Global
March 30, Go to the drive manufacturer’s site and download their diagnostics and test the drive. Ga-k8vvm800m really have two different issues. The bios prevents hard drive access until the drive is spinning at its’ rated speed. So, testing and back up of that drive is critical. Only use the “not through the Internet” method as described in 4.
Hi, I think you need to look at the motherboard again to check the model number. Grab those for me. I have a spare sata hard disk.
So, I think we are dealing with a different model motherboard. Samsung SyncMaster – 15 inches Network Card: Think carefully before you flash.
SATA DRIVES NOT RECOGNISED IN BIOS FOR GIGABYTE GA K8VM800 MOTHERBOARD
If I change the cables and then try again, it works. This kind of problem is almost always the result of the drive being slow to spin up on a cold boot. You may also need this utility: If the drive is not spinning up properly, the bios cannot access the drive when it is ready to turn over the system boot to the drive. I could see this on the mother board. That will tell you if the drive is failing.
Your manual will tell you how to do that also.
Microsoft Windows XP Professional 5. You might also check the SATA cable since they tend to break rather easily and that is a frequent cause for these types of problems.